This welcome lights is positioned into the under surface of the front doors. When the door is opened, the cadillac logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. When you close the door, the logo light disappears.
Cadillac SRX 2011-2017
Cadillac XTS 2009-2016（2013Except）
Cadillac ATS 2014-2017
According to the buyer experience, the door light would not fit for the following car models:
2005 CTS,2008 CTS,2010 CTS, 2011 CTS, 2012 CTS, 2012 CTS Coupe ,2013 CTS,2014 CTS ,2014 CTS AWD PERFORMANCE 3.6,
2014 Cadillac CTS Sedan,2007 Escalade, 2008 Escalade, 2010 Escalade, 2014 Cadillac Escalade,2014 Cadillac Escalade platinum, 2016 Escalade,
2013 Cadillac XTS, 2013 ATS, 2007 SRX, 2008 SRX,2012 SRX ,2004 Cadillac Deville DTS,2009 DTS, 2002 Cadillac Deville,2011 Cadillac ESV.
Please check whether your car inside the suitable models.
2 pieces welcome light
Package Size: 9.5 * 3.8 * 9.5 (cm)
1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground.
- Dedicated to the cadillac car,Installation is simple,Directly replace the original car door lights
- No drilling, no wiring, no disassemblying, no damage to your Car. Easy to install,It will only take you about 5 minutes.
- When the door is opened, the cadillac LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
- High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
- Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.